Life Fitness Flat Panel Television M051 00K32 A084 User Manual

Life Fitness LCD Entertainment System

How To Replace the Main PC Board

Special service tools required: none

1. Disconnect the three cables from the back of the

console. The power cable and the coax cable are

screw-on connectors.

Antenna

Coax

Power

Cable

Tan 10-Pin Connector

(for remote control)

Black 8-Pin Connector

(for in-console control)

2. Remove the four screws that secure

the TV console to the support frame.

3. Remove the TV console assembly.

M051-00K32-A084

Life Fitness LCD Entertainment System

How To Replace the Main PC Board - continued

7. Remove the four screws that secure the main PC board to the bracket.

8. Lift out the main PC board.

Note: For Version 1 units, remove and discard the static PCB and all attached cables.

9. Reverse steps 1 through 8 to install the new

main PC board. On Version 1 TVs, connect

Bracket

the remote cable to the 10-pin connector as

Main PC Board

shown in the diagram on the previous page.

On Version 2 TVs, reconnect all cables as

they were removed

10. To reprogram the channels, refer to the

operation manual.

M051-00K32-A084